榆次High-grade Tunnel Baking Oven

▌高端隧道式烤炉是用气或电加热烘烤威化饼片。整机选用PLC程序、触摸屏控制，操作方便，自动控温、下浆、吹气、接片完成烤饼片工序。

▌高端隧道式烤炉是威化饼干生产线中非常重要的设备。 威化烘烤系统使用气体加热烘烤板。 烤炉的功能是全自动的，从将面糊铺在盘子上直到烤好的威化片从烤箱中出来。 烘烤均匀，为下道工序生产出优质威化片。 PLC中有PID控制器，用于自动控制烤盘的温度。PID所需信号的采集由红外传感器提供。烤箱状态显示和数据复位由触摸屏提供，所有电机都有启动电流保护和热过载保护。

-------------------------------------------------------------------------------------------------------------------------------------------

The equipment is to bake wafer sheet with gas or electric heating. The whole machine adopts PLC program, touch screen control, easy to operate, automatic temperature control, pulping, blowing, and splicing to complete the baking sheet process.

This device is a very important device in the Wafer biscuit production line. The baking system uses Gas or Electricity to heat the baking Plates. The function of the oven is fully automatic, from feeding batter on the plate until the baking sheets come out of the oven. The baking is evenly baked to produce high -quality prestige wafer sheets for the lower procedure. PLC has a PID controller to automatically control the temperature of the baking Plates. The collection of signals required by PID is provided by infrared sensors. The state display and data reset of the oven are provided by the touch screen, and all motors have started current protection and heat overload protection.

● 烤炉设计升降保护门; 

● 带自动报警装置；

● 机架不易变形；

● 自动张紧功能；

● 炉底带自动清渣功能；

● 威化片粉头最大浪费: 4%;

● 带烟囱及风机(管道 5 米长)自动控温;

● 探测仪采集信号输给PLC 程控器，通过 PID 控制器自动控制；烤炉的温度；调节火苗大小；

● 炉门采用高温吸附性密封胶条, 防止热量外传达到烘烤标准。

-------------------------------------------------------------------------------------------------------------------------------------------

● Designed lifting protection door for the oven;

● With automatic alarm device;

● The frame is not easily deformed;

● Automatic tensioning function；

● Furnace bottom with automatic slag cleaning function;

● Maximum waste of wafer powder: 4%;

● Automatic temperature control with chimney and fan (pipeline 5 meters long);

● The signal collected by the detector is output to PLC program controller, through the PID controller to automatically control; The temperature of the oven; adjust the size of the flame;

● The furnace door adopts high-temperature adsorption sealing strips to prevent the heat from reaching the baking standard.